- All Categories
- B2B Offers
- Residential Torsions
- Extension Springs
- Garage Door Tracks
- Torsion Shafts
- Garage Door Struts
- Guides & FAQ
- Commercial Torsions
- EZ-set Galvanized Torsions
- Mini Warehouse Springs
- Opener Systems
- Remotes
- Extension Spring Hardware
- Installation kit
- Winding Bars (Garage Door Torsion Spring Tools)
- Drums
- Cables
- Hinges
- Rollers
- Weather Seals
- End Bearing
- Garage Door Top & Bottom Brackets Residential & Commercial Hardware
- Operator Brackets (ORB / ARB) + T-Rail Mounting Brackets
- About Us
- Contact Us
- FAQs
Shop replacement Residential Garage Door Torsion Springs made from oil-tempered USA steel, with cones included and options for multiple wire sizes, inside diameters, spring lengths, and left-, right-, or pair-wind configurations.
Click the link HOW TO MEASURE SPRINGS in order to define the product specs. Or get live expert advice to pick your perfect spring or ask about measurements by calling 386-569-8223
Pick your spring by Inside Diameter
Pick Your Spring's Wire Size
Click to see the size chart
- Residential Torsion Spring (With Cones) 0.177 Wire Size
- Residential Torsion Spring (With Cones) 0.182 Wire Size
- Residential Torsion Spring (With Cones) 0.1875 Wire Size
- Residential Torsion Spring (With Cones) 0.192 Wire Size
- Residential Torsion Spring (With Cones) 0.200 Wire Size
- Residential Torsion Spring (With Cones) 0.207 Wire Size
- Residential Torsion Spring (With Cones) 0.218 Wire Size
- Residential Torsion Spring (With Cones) 0.225 Wire Size
- Residential Torsion Spring (With Cones) 0.234 Wire Size
- Residential Torsion Spring (With Cones) 0.243 Wire Size
- Residential Torsion Spring (With Cones) 0.250 Wire Size
- Residential Torsion Spring (With Cones) 0.262 Wire Size
- Residential Torsion Spring (With Cones) 0.273 Wire Size
- Residential Torsion Spring (With Cones) 0.283 Wire Size
- Residential Torsion Spring (With Cones) 0.289 Wire Size
- Residential Torsion Spring (With Cones) 0.295 Wire Size
- Residential Torsion Spring (With Cones) 0.306 Wire Size
Residential Torsion Springs
Torsion springs sit on a shaft above the door and do the heavy lifting — literally. The stored torque in the coils is what raises and lowers a door that might weigh a few hundred pounds. All ours are oil-tempered USA steel. To get the right replacement you need four things: wire size (calipers or count 10 and 20 coils), inside diameter, coil length without the cones, and wind direction. Left-wound goes on the right side of the bracket. Replace both springs, always, and use real winding bars.